KwaZulu-Natal
CALL US:
+27 (0)31 705 7733
Johannesburg
CALL US:
+27 (0)11 822 7242
Cape Town
CALL US:
+27 (0)21 535 4455

CONSTRUCTION
PRODUCT RANGE

Technical Finishes is a manufacturer and supplier of construction related systems to be used on any construction site. Our Construction Product range includes products in the following categories.
• 
Concrete curing & sealing
• 
Adhesives & repair products
• 
Construction grouting
• 
Construction floor systems
• 
Waterproofing products
• 
Joint sealants
BROCHURE

DOWNLOAD OUR CONSTRUCTION PRODUCT RANGE BROCHURE

• 
Concrete Curing & Sealing
• 
Adhesives and Repair Products
• 
Construction Grouting
• 
Construction Floor Systems
• 
Waterproofing Products
• 
Joint Sealants
download
CONCRETE CURING
ADHESIVES & REPAIR PRODUCTS
CONSTRUCTION GROUTING
CONSTRUCTION FLOOR SYSTEMS
WATERPROOFING PRODUCTS
JOINT SEALANTS
Construction product range

CONCRETE CURING

Technical Finishes offer a range of acrylic and resin based concrete curing agents that can be used to retain moisture in freshly cast concrete.
Techfin Acryl Cure
TECHFIN ACRYL CURE is a water-based acrylic emulsion of milky appearance which dries to a colourless, stain-free surface finish when applied to newly cast concrete. The product is ready to use, has exceptional grab character and develops a tenacious bond to the host substrate and is applied to concrete surfaces following the final finishing or stripping of forms.
download DATA SHEET
Techfin Resin Cure
Composed of high grade petroleum resin extracts in a solution of quick drying solvents, TECHFIN RESIN CURE gives a high curing efficiency for concrete substrates.
download DATA SHEET
Construction product range

ADHESIVES & REPAIR PRODUCTS

A standard range of construction adhesives for concrete and metal as well as a range of repair products that can be used to repair cracks in concrete, protect steel and concrete against corrosion and give concrete an aesthetically pleasing finish.
Solidkote 110
Is a permanent epoxy adhesive for bonding of internal or external renderings, granolithic toppings and concrete to concrete. It tolerates a degree of moisture before and during curing and is insoluble when cured. The ultimate bond strength is greater than the tensile strength of concrete.
download DATA SHEET
Solidkote 302
Is a thixotropic, solvent free, epoxy adhesive putty for bonding of high alumina tiles, steel, metal alloys, fibreglass, wood, concrete, ceramics and glass. Solidkote 302 also bonds aluminium and plastic road stud light reflectors to a tar or concrete road surface.
download DATA SHEET
Techfin Chemical Repair Mortar
Is a readyto- use grout which chemically sets within minutes to form an extremely hard mortar repair. Formulated to give controlled high early strength properties for rapid repairs to traffic areas and for low temperature repair work.
download DATA SHEET
Techfin Crack Injection
Is a two component crack injection fluid for sealing cracks, filling cavities and voids in concrete and stopping water ingress. Techfin Crack Injection compound is a high strength, low viscosity, pourable Epoxy compound capable of penetrating even the finest of cracks and forming a solid bond.
download DATA SHEET
Techfin Gp Epoxy
Is a non-slump epoxy paste bedding, repair and adhesive. It is a two component, fast curing compound, ideal for a variety of bedding, gap filling and concrete repair applications. TECHFIN GP EPOXY is a stiff but workable compound that can be applied by either trowel, spatula or knife.
download DATA SHEET
Techfin Metal Primer
Steel reinforcing that has been exposed to oxidation must be protected and the safest method to accomplish this is by replacing the alkalinity of the concrete which has spalled away. TECHFIN METAL PRIMER is a cementitious resin system with enhanced alkalinity to provide a shield which is necessary to re-instate the protection.
download DATA SHEET
Techfin Plaster Finish
acrylic polymer modified repair mortar for use as a fairing compound or cosmetic coat mortar. When mixed with water, as directed, a fine grey trowelable mortar results which can readily be applied to fill in pores, blowholes and blemishes on a concrete surface.
download DATA SHEET
Techfin Probond
Techfin Probond is a styrene-butadiene co-polymer for use with cementitious compositions. It is used in mortar and concretes as an admixture to increase resistance to water penetration, improve abrasion resistance and durability. The use of Techfin Probond in cement-based slurries and mortars is a reliable and highly water resistant bonding agent.
download DATA SHEET
Techfin Structural Repair Mortar
Is a fibre reinforced, thixotropic, polymer modified cementitious repair mortar suitable for heavy duty repairs to concrete, aerated concrete and all types of concrete structures. Provides high strength repairs to load bearing structures. The product exhibits excellent bond characteristics to structural steel reinforcement and concrete.
download DATA SHEET
Construction product range

CONSTRUCTION GROUTING

Technical Finishes offer a complete range of epoxy and cement based grouts that can be used as a general purpose grouting or for filling in and bulking out areas required for heavy duty support.
Techfin Bulked Grout
Is a premixed ready-touse dry grout with a precise blend of graded siliceous and pea gravel aggregates, controlled chemicals, incorporating shrinkage compensating ingredients and Portland Cements to produce a workable non-shrink grout. It is grey coloured, non-oxidising and has no added chlorides or nitrates.
download DATA SHEET
Techfin Flowable Grout
Is a premixed readyto- use dry grout with specially graded siliceous aggregates, shrinkage compensating chemicals and blended with Portland Cements to produce a fluid non-shrink grout. It is grey in colour, is nonoxidizing and has no added chlorides or nitrates.
download DATA SHEET
Techfin Gp Grout
Is a premixed ready-to-use dry grout with specially graded siliceous aggregates, shrinkage compensation chemicals and blended with Portland Cements to produce a non-shrink grout. It is grey coloured, nonoxidizing and has no added chlorides or nitrates.
download DATA SHEET
Techfin Pourable Gp Epoxy
Is a high strength, low viscosity, solvent free, self-leveling epoxy resin grout compound formulated to withstand static and dynamic loads in a wide variety of applications. TECHFIN POURABLE GP EPOXY is suitable for an application thickness range of 10- 80mm.
download DATA SHEET
Construction product range

CONSTRUCTION FLOOR SYSTEMS

Technical Finishes offer a range of cementitious overlayments that repair and
strengthen the concrete substrate before final screed finishes are applied as well as offer good aesthetic characteristics.
Floorskim
Is a fine, cement based skimming and scraper coating compound for smoothing floors prior to vinyl tiling or sheeting. It may be used at thicknesses up to 10mm in one operation. FLOORSKIM provides a rapid drying and hardening finish, which is ready for tiling when visibly dry.
download DATA SHEET
Flowline
Is a fine, flowable, cementitious based, single component, self-levelling floor
underlayment screed. Flowline is designed for levelling of floors prior to application of vinyl tiling, carpeting and tiling. FLOWLINE provides a very smooth, hardened finish, which is ready for coverings approximately 12 hours later.
download DATA SHEET
Nanoscreed
Nanoscreed is a decorative, cementitious, polymer modified, twin pack, self-leveling
flooring compound designed to provides an attractive smooth finish to concrete floors.
Nanoscreed is polymer modified to add strength, durability and good adhesion to most mineral based substrates.
download DATA SHEET
Sealkote
acrylic in water based form for use of application with the minimum of effort. Porous surfaces need sealing to retain their appearance and protect against staining by fats and oils. Substrates that are not sealed absorb dirt and cannot be cleaned to their original appearance.
download DATA SHEET
Smooth ‘N Patch
Is a two component, polymer modified, cementitious floor levelling
and patch repair mortar system. SMOOTH n PATCH is an original, versatile, durable,
economical and useful repair and floor levelling screed that has a smooth attractive finish.
download DATA SHEET
Solidscreed 90
Is a high strength industrial floor overlay screed for the resurfacing of old, worn, damaged concrete surfaces by providing a hard wearing surface with excellent impact resistance.
download DATA SHEET
Solidscreed 400 Pre-Bulked
Is a ready to use blend of hard wearing aggregates, polymer modified cement and additives which produces a hard wearing, impact resistant 30-100mm floor. SOLIDSCREED 400 should be used to overlaying damaged concrete floors or for patch repairing where partial damage has occurred.
download DATA SHEET
Techfin Concrete Densifier Na
Is a low viscosity, waterbased liquid chemical hardener for concrete. It is designed to improve the general abrasion resistance and non-dusting nature of the surface.
download DATA SHEET
Techfin Seal & Strengthen
Is a low viscosity, water-based, acrylic polymer in combination with a silicate chemical hardener designed for coating porous and powdering concrete surfaces. It is designed to improve the general abrasion resistance and non-dusting nature of the surface as well as protect and seal the floor surface from dirt and harmful chemical substances.
download DATA SHEET
Construction product range

WATERPROOFING PRODUCTS

Technical Finishes offers a range of cementitious and acrylic waterproofing products that can be applied as a water barrier system to cementitious substrates or for sealing off flowing water in concrete structures.
Prodox
Is a single component, polymer modified, cementitious plaster sealer for application onto a wide variety of cementitious surfaces to provide a smooth, durable waterproof and decorative finish. The polymer additives ensure optimum adhesion, crackbridging, flexibility and substrate versatility.
download DATA SHEET
Smooth & Patch Special
Is a two component, polymer modified, cementitious waterproofing plaster system designed to line, waterproof, repair and resurface concrete and masonry substrates associated with water retaining structures.
download DATA SHEET
Speedpatch
Speedpatch is a ready to mix blend of quick setting cement and aggregate for rapid patching of floors, walls and cast concrete items. Speedpatch may also be used for smoothing out imperfections in surfaces prior to the application of coatings or other screeds.
download DATA SHEET
Techfin Waterguard
Is a two part polymer modified cementitious waterproof mortar
sealing slurry consisting of highly flexible liquid polymer, special water repellent admixtures and cements and silica aggregates.
download DATA SHEET
Construction product range

JOINT SEALANTS

Technical Finishes offers a range of cementitious and acrylic waterproofing products that can be applied as a water barrier system to cementitious substrates or for sealing off flowing water in concrete structures.
Joint Sealer 299lv
A twin pack polyurethane sealing compound designed to form a durable rubber like seal. It is highly elastic and is able to withstand continuous extension and recovery. Jointsealer 299LV may be used with common substrates such as concrete, plaster, brick and stone.
download DATA SHEET
Joint Sealer 515 Lm
JOINT SEALER 515 LM is a thixotropic, solvent free, moisture curing, hybrid sealant. It exhibits low modulus and hardness combined with very high elongation properties. It has good moisture and oxidation resistance and excellent adhesion to most building substrates.
download DATA SHEET
Joint Sealer 525
Is a thixotropic, solvent free, moisture curing sealant. It is a filled system that has moisture and oxidation resistance and exhibits good adhesion to cementitious and
steel substrates.
download DATA SHEET
COPYRIGHT TECHNICAL FINISHES (PTY) LTD | DESIGNED & DEVELOPED BY THINKTANK CREATIVE
linkedin facebook pinterest youtube rss twitter instagram facebook-blank rss-blank linkedin-blank pinterest youtube twitter instagram