Specialist Construction Range

Our Construction Range

Technical Finishes is a manufacturer and supplier of construction-related systems used on all construction sites.

Technical Finishes structural adhesives are applied in construction as joint-sealers and are successfully used to seal joints in floors and walls in industrial and commercial buildings. Road surfaces, runways, and airport hangars are also examples of common applications.

Technical Finishes self levelling cement screeds, non shrink grouts and polymer reinforced cementitious slurries are for the repair and protection of concrete structures including bridges, building and silos from water damage and adverse weather conditions.

Our combination of structural adhesive and cementitious products provide a host of structural and waterproofing solutions for common structures such as walls, ponds, roofs, tunnels, foundations, and underground structures.

Our construction product range includes:

  • Concrete curing and sealing products
  • Adhesives and repair products
  • Construction grouting
  • Construction floor systems
  • Waterproofing products
  • Joint sealants
  • ...
    CONSTRUCTION PRODUCT RANGE BROCHURE

    Product Usage: Concrete Curing & Sealing, Adhesives and Repair Products, Construction Grouting, Construction Floor Systems, Waterproofing Products, Joint Sealants

    CONCRETE CURING
    ADHESIVES & REPAIR PRODUCTS
    CONSTRUCTION GROUTING
    CONSTRUCTION FLOOR SYSTEMS
    WATERPROOFING PRODUCTS
    JOINT SEALANTS

    CONSTRUCTION PRODUCT RANGE

    CONCRETE CURING

    Technical Finishes offer a range of acrylic and resin based concrete curing agents that can be used to retain moisture in freshly cast concrete.

    TECHFIN ACRYL CURE

    TECHFIN ACRYL CURE is a water-based acrylic emulsion of milky appearance which dries to a colourless, stain-free surface finish when applied to newly cast concrete. The product is ready to use, has exceptional grab character and develops a tenacious bond to the host substrate and is applied to concrete surfaces following the final finishing or stripping of forms.

    DOWNLOAD
    TECHFIN RESIN CURE

    Composed of high grade petroleum resin extracts in a solution of quick drying solvents, TECHFIN RESIN CURE gives a high curing efficiency for concrete substrates.

    DOWNLOAD

    CONSTRUCTION PRODUCT RANGE

    ADHESIVES & REPAIR PRODUCTS

    A standard range of construction adhesives for concrete and metal as well as a range of repair products that can be used to repair cracks
    in concrete, protect steel and concrete against corrosion and give concrete an aesthetically pleasing finish.

    SOLIDKOTE 110

    Is a permanent epoxy adhesive for bonding of internal or external renderings, granolithic toppings and concrete to concrete. It tolerates a degree of moisture before and during curing and is insoluble when cured. The ultimate bond strength is greater than the tensile strength of concrete.

    DOWNLOAD
    SOLIDKOTE 302

    Is a thixotropic, solvent free, epoxy adhesive putty for bonding of high alumina tiles, steel, metal alloys, fibreglass, wood, concrete, ceramics and glass. Solidkote 302 also bonds aluminium and plastic road stud light reflectors to a tar or concrete road surface.

    DOWNLOAD
    TECHFIN CHEMICAL REPAIR MORTAR

    Is a readyto- use grout which chemically sets within minutes to form an extremely hard mortar repair. Formulated to give controlled high early strength properties for rapid repairs to traffic areas and for low temperature repair work.

    DOWNLOAD
    TECHFIN CRACK INJECTION

    Is a two component crack injection fluid for sealing cracks, filling cavities and voids in concrete and stopping water ingress. Techfin Crack Injection compound is a high strength, low viscosity, pourable Epoxy compound capable of penetrating even the finest of cracks and forming a solid bond.

    DOWNLOAD
    TECHFIN GP EPOXY

    Is a non-slump epoxy paste bedding, repair and adhesive. It is a two component, fast curing compound, ideal for a variety of bedding, gap filling and concrete repair applications. TECHFIN GP EPOXY is a stiff but workable compound that can be applied by either trowel, spatula or knife.

    DOWNLOAD
    TECHFIN METAL PRIMER

    Steel reinforcing that has been exposed to oxidation must be protected and the safest method to accomplish this is by replacing the alkalinity of the concrete which has spalled away. TECHFIN METAL PRIMER is a cementitious resin system with enhanced alkalinity to provide a shield which is necessary to re-instate the protection.

    DOWNLOAD
    TECHFIN PLASTER FINISH

    Acrylic polymer modified repair mortar for use as a fairing compound or cosmetic coat mortar. When mixed with water, as directed, a fine grey trowelable mortar results which can readily be applied to fill in pores, blowholes and blemishes on a concrete surface.

    DOWNLOAD
    TECHFIN PROBOND

    Techfin Probond is a styrene-butadiene co-polymer for use with cementitious compositions. It is used in mortar and concretes as an admixture to increase resistance to water penetration, improve abrasion resistance and durability. The use of Techfin Probond in cement-based slurries and mortars is a reliable and highly water resistant bonding agent.

    DOWNLOAD
    TECHFIN STRUCTURAL REPAIR MORTAR

    Is a fibre reinforced, thixotropic, polymer modified cementitious repair mortar suitable for heavy duty repairs to concrete, aerated concrete and all types of concrete structures. Provides high strength repairs to load bearing structures. The product exhibits excellent bond characteristics to structural steel reinforcement and concrete.

    DOWNLOAD

    CONSTRUCTION PRODUCT RANGE

    CONSTRUCTION GROUTING

    Technical Finishes offer a complete range of epoxy and cement based grouts that can be used as a general purpose grouting or for
    filling in and bulking out areas required for heavy duty support.

    TECHFIN BULKED GROUT

    Is a premixed ready-touse dry grout with a precise blend of graded siliceous and pea gravel aggregates, controlled chemicals, incorporating shrinkage compensating ingredients and Portland Cements to produce a workable non-shrink grout. It is grey coloured, non-oxidising and has no added chlorides or nitrates.

    DOWNLOAD
    TECHFIN FLOWABLE GROUT

    Is a premixed readyto- use dry grout with specially graded siliceous aggregates, shrinkage compensating chemicals and blended with Portland Cements to produce a fluid non-shrink grout. It is grey in colour, is nonoxidizing and has no added chlorides or nitrates.

    DOWNLOAD
    TECHFIN GP GROUT

    Is a premixed ready-to-use dry grout with specially graded siliceous aggregates, shrinkage compensation chemicals and blended with Portland Cements to produce a non-shrink grout. It is grey coloured, nonoxidizing and has no added chlorides or nitrates.

    DOWNLOAD
    TECHFIN POURABLE GP EPOXY

    Is a high strength, low viscosity, solvent free, self-leveling epoxy resin grout compound formulated to withstand static and dynamic loads in a wide variety of applications. TECHFIN POURABLE GP EPOXY is suitable for an application thickness range of 10- 80mm.

    DOWNLOAD

    CONSTRUCTION PRODUCT RANGE

    CONSTRUCTION FLOOR SYSTEMS

    Technical Finishes offer a range of cementitious overlayments that repair and strengthen the concrete substrate
    before final screed finishes are applied as well as offer good aesthetic characteristics.

    FLOORSKIM

    Is a fine, cement based skimming and scraper coating compound for smoothing floors prior to vinyl tiling or sheeting. It may be used at thicknesses up to 10mm in one operation. FLOORSKIM provides a rapid drying and hardening finish, which is ready for tiling when visibly dry.

    DOWNLOAD
    FLOWLINE

    Is a fine, flowable, cementitious based, single component, self-levelling floor underlayment screed. Flowline is designed for levelling of floors prior to application of vinyl tiling, carpeting and tiling. FLOWLINE provides a very smooth, hardened finish, which is ready for coverings approximately 12 hours later.

    DOWNLOAD
    FLOWLINE SL PREMIUM

    Flowline SL Premium, a heavy duty self-levelling floor screed compound with early compressive strength development. Formulated for levelling of uneven concrete floor surfaces prior to installation of floor coverings, coatings and resin based flooring systems.

    DOWNLOAD
    NANOSCREED

    Nanoscreed is a decorative, cementitious, polymer modified, twin pack, self-leveling flooring compound designed to provides an attractive smooth finish to concrete floors. Nanoscreed is polymer modified to add strength, durability and good adhesion to most mineral based substrates.

    DOWNLOAD
    SEALKOTE

    Acrylic in water based form for use of application with the minimum of effort. Porous surfaces need sealing to retain their appearance and protect against staining by fats and oils. Substrates that are not sealed absorb dirt and cannot be cleaned to their original appearance.

    DOWNLOAD
    SMOOTH ‘N PATCH

    Is a two component, polymer modified, cementitious floor levelling and patch repair mortar system. SMOOTH n PATCH is an original, versatile, durable, economical and useful repair and floor levelling screed that has a smooth attractive finish.

    DOWNLOAD
    SOLIDSCREED 90

    Is a high strength industrial floor overlay screed for the resurfacing of old, worn, damaged concrete surfaces by providing a hard wearing surface with excellent impact resistance.

    DOWNLOAD
    SOLIDSCREED 400

    Is a ready to use blend of hard wearing aggregates, polymer modified cement and additives which produces a hard wearing, impact resistant 30-100mm floor. SOLIDSCREED 400 should be used to overlaying damaged concrete floors or for patch repairing where partial damage has occurred.

    DOWNLOAD
    TECHFIN CONCRETE DENSIFIER NA

    Is a low viscosity, waterbased liquid chemical hardener for concrete. It is designed to improve the general abrasion resistance and non-dusting nature of the surface.

    DOWNLOAD
    TECHFIN SEAL & STRENGTHEN

    Is a low viscosity, water-based, acrylic polymer in combination with a silicate chemical hardener designed for coating porous and powdering concrete surfaces. It is designed to improve the general abrasion resistance and non-dusting nature of the surface as well as protect and seal the floor surface from dirt and harmful chemical substances.

    DOWNLOAD

    CONSTRUCTION PRODUCT RANGE

    WATERPROOFING PRODUCTS

    Technical Finishes offers a range of cementitious and acrylic waterproofing products that can be applied
    as a water barrier system to cementitious substrates or for sealing off flowing water in concrete structures.

    PRODOX

    Is a single component, polymer modified, cementitious plaster sealer for application onto a wide variety of cementitious surfaces to provide a smooth, durable waterproof and decorative finish. The polymer additives ensure optimum adhesion, crackbridging, flexibility and substrate versatility.

    DOWNLOAD
    SMOOTH & PATCH SPECIAL

    Is a two component, polymer modified, cementitious waterproofing plaster system designed to line, waterproof, repair and resurface concrete and masonry substrates associated with water retaining structures.

    DOWNLOAD
    SPEEDPATCH

    Speedpatch is a ready to mix blend of quick setting cement and aggregate for rapid patching of floors, walls and cast concrete items. Speedpatch may also be used for smoothing out imperfections in surfaces prior to the application of coatings or other screeds.

    DOWNLOAD
    TECHFIN HYDRAKOTE

    Techfin Hydrakote is a flexible, elastomeric liquid coating based on acrylic co-polymers which dries to give a durable, protective, highly elastic waterproofing membrane with excellent film build properties and long-lasting UV resistance characteristics. Techfin Hydrakote resists carbonation and prevents chloride ion ingress.

    DOWNLOAD
    TECHFIN WATERGUARD

    Acrylic in water based form for use of application with the minimum of effort. Porous surfaces need sealing to retain their appearance and protect against staining by fats and oils. Substrates that are not sealed absorb dirt and cannot be cleaned to their original appearance.

    DOWNLOAD

    CONSTRUCTION PRODUCT RANGE

    JOINT SEALANTS

    Technical Finishes offers a range of cementitious and acrylic waterproofing products that can be applied as a water barrier system
    to cementitious substrates or for sealing off flowing water in concrete structures.

    JOINT SEALER 299LV

    A twin pack polyurethane sealing compound designed to form a durable rubber like seal. It is highly elastic and is able to withstand continuous extension and recovery. Jointsealer 299LV may be used with common substrates such as concrete, plaster, brick and stone.

    DOWNLOAD
    JOINT SEALER 515 LM

    JOINT SEALER 515 LM is a thixotropic, solvent free, moisture curing, hybrid sealant. It exhibits low modulus and hardness combined with very high elongation properties. It has good moisture and oxidation resistance and excellent adhesion to most building substrates.

    DOWNLOAD
    JOINT SEALER 525

    Is a thixotropic, solvent free, moisture curing sealant. It is a filled system that has moisture and oxidation resistance and exhibits good adhesion to cementitious and steel substrates.

    DOWNLOAD

    Back
    KZN BRANCH
    GAUTENG BRANCH
    WESTERN CAPE BRANCH
    GET IN TOUCH
    NEWSLETTER SUBSCRIPTION
    WHATSAPP US