Solidwear HP101

High Performance Epoxy Wearing Compound
Solidwear HP101 is a high performance technically advanced epoxy wearing compound containing graded high alumina ceramic bead fillers up to 2 mm, in a blended epoxy resin system. Provides a long lasting lining to plant and equipment subject to a high degree of abrasive wear in highly acidic corrosive environments. Excellent slump resistance on vertical or overhead applications. Can cure underwater.

benefits

Excellent acid resistance > 60% Sulphuric acid. Strong acid blends typically used in mine processing.

Cuts down time to a minimum, as most repairs are done on site. Extends life of costly plant and components.

Easy to mix and apply. It conforms and spreads easily into tight corners and curved surfaces.

Can be applied to vertical and overhead surfaces. Applied from 5 mm up to 20 mm.

Water smoothable – Lightly wetting trowel or gloved hand gives a smooth finish.

Rapid Cure - Normally ready to use in 12 hours at normal room temperature - less if heat is applied.

Excellent adhesion to metal and other surfaces under adverse conditions including damp surfaces.

Good low temperature cure down to 5°C.

Talk To a Specialist Today!