Techfin Plaster Finish
Single Component Polymer Modified Faring Coat Cosmetic Mortar For Concrete Surfaces
Techfin Plaster Finish is a single component acrylic polymer modified repair mortar for use as a fairing compound or cosmetic coat mortar. When mixed with water, as directed, a fine grey trowelable mortar results which can readily be applied to fill in pores, blowholes and blemishes on a concrete surface. Techfin Plaster Finish may also be used as a skim coat prior to application of protective coatings. It is specially formulated to produce a shrinkage compensating mortar with no cracking when applied in a thin section. Adhesion to concrete and flexibility are excellent.
Applications
- As a fairing or skim coat to cover and make good blemishes in concrete surfaces such as slight honeycombing, blowholes, defects caused by “sand runs”, patch repairs, shutter movement and grout loss.
- Preparatory treatment to concrete to receive a thin film protective coating.
- To produce a uniform surface over repaired areas.
benefits
Precision made for consistent results
Requires only water addition for easy application
Shrinkage compensating
Smooth, easily produced finish
Low permeability. Excellent resistance to freeze / thaw action and carbonation.
Subsequent paint coats can be applied with great economy
Available colors
Light Stone
Brick Red
Mid Grey
Light Blue
Dark Grey
Traffic Yellow
Dark Green
Cream